[time-nuts] TimeLab PM6690 CNT9X?

[Magnus Danielson]

On 05/11/2013 12:33 AM, Tom Knox wrote:
> Thanks Magnus;
> Do not go to any extra trouble on my account. The PM6690 also has a 53132A mode that may work. I assumed all this had been tried before and I could save a lot of time and effort

At least on my counter with my FW it didn't work with the 53132A mode. 
It would be good if it could be supported natively by TimeLab.

Cheers,
Magnus

> Best Wishes;
> Thomas Knox
>
>
>
>> Date: Fri, 10 May 2013 22:16:54 +0200
>> From: magnus at rubidium.dyndns.org
>> To: time-nuts at febo.com
>> Subject: Re: [time-nuts] TimeLab PM6690 CNT9X?
>>
>> Hi Tom,
>>
>> On 05/10/2013 08:02 PM, Tom Knox wrote:
>>> Has anyone used Time Lab with The current Fluke PM6690, Spectracom CNT90/91?
>>> Thanks;
>>
>> CNT90 (aka PM6690) did not use to work with TimeLab, as CNT90 does not
>> to talk-only, which is the normal requirement for TimeLab generic
>> counter support.
>>
>> I don't remember if I managed to get it operating or not, but I could
>> take it for a test-spin if you like. The CNT-80 driver should work
>> thought, as it builds on the SCPI commandset.
>>
>> Cheers,
>> Magnus
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>   		 	   		
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.