[time-nuts] A Time-Nut's Worst Nightmare
Kenton A. Hoover
kenton at nemersonhoover.org
Sat May 11 22:18:05 EDT 2013
I'm creating a controller to allow synchronization of Standard Time Company and IBM/Simplex slave clocks, which can be generally found for $25-60 at flea markets. They're usually surplus from schools or industrial applications and not that difficult to find. For right now I'm just trying to get the device to deal with ST-DST transitions correctly (as well as slamming it to current time the first time a clock is connected) using the mechanical gearing but there is no reason the 60 Hz can't be created from a 1 PPS standard once I get the rest done.
There is a commercial impulser that can be found for about $100 but I don't see a way to easily adopt it.
--
Kenton A. Hoover
kenton at nemersonhoover.org
+1.415.830.5843
On Saturday 11 May 2013 at 16:22, Dale J. Robertson wrote:
> There is no shortage of solutions in the $250-$1500(!) per wall clock range.
> Not so many $10 per clock offerings.
> Dale NV8U
>
>
> -----Original Message-----
> From: Eric Williams
> Sent: Saturday, May 11, 2013 1:40 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] A Time-Nut's Worst Nightmare
>
> On Sat, May 11, 2013 at 8:09 AM, Dale J. Robertson <dale at nap-us.com (mailto:dale at nap-us.com)> wrote:
>
> > An interesting possibility is getting rid of the 'randomizer' , manually
> > setting the time and feeding the clock mechanism with station 1pps. It
> > would make for a cheap synchronized clock setup. albeit with the issue of
> > having to set the clocks individually and manually for DST changes power
> > outages etc. I wonder if just the clock is available i.e without the pcb.
>
>
>
>
> Just buy an
> OnTime<http://www.amazon.com/Inova-Solutions-12-Analog-Ethernet-Network/dp/B009VBSCS6>
> if
> that's what you want.
> --
> eric
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com (mailto:time-nuts at febo.com)
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com (mailto:time-nuts at febo.com)
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list