[time-nuts] TimeLab PM6690 CNT9X?

Jerry jsternmd at att.net
Sun May 12 18:11:53 EDT 2013

Yes, Native mode and it works fine with either the Prologix or Agilent
GPIB-USB.  For Prologix USB Timelabs has special check box that needs to
ticked off.


-----Original Message-----
From: Magnus Danielson [mailto:magnus at rubidium.dyndns.org] 
Sent: Sunday, May 12, 2013 09:56
To: time-nuts at febo.com
Subject: Re: [time-nuts] TimeLab PM6690 CNT9X?

On 12/05/13 02:15, Jerry wrote:
> I just bought a PM6690/AN (CNT-90) and my inexperience led to quite a 
> roundabout path to getting it to work with either the Agilent 82357b 
> or Prologix GPIB-USB interfaces (using  Agilent IO Suite 16.3 or NI Max).
> However, once I figured out the PM6690 front panel GPIB setup, Timelab 
> worked quite well using the PM6680 driver option,  So far it seems to 
> be capturing and plotting data quite well though I have not yet used 
> all of the Timelab functions.

OK. I will have to upgrade to the beta and test again. I assume you used the
Native mode.


More information about the time-nuts mailing list