[time-nuts] Mounting Suggestions for Morion MV89A

Bob Camp lists at rtty.us
Fri May 17 19:06:03 EDT 2013


The big question is weather yours has the "capacitor of death" problem or not. If it has the bum capacitor(s) in it, you will need to pop it open and replace the cap. I would check things out before moving forward.


On May 17, 2013, at 4:19 PM, Frederick Bray <fwbray at mminternet.com> wrote:

> I just received my first Morion MV89A.  It came attached to a piece of the original PC board.
> I wonder how others have mounted theirs.  One option seems to be to get a piece perf board (perhaps with solder pads).  Another might be to leave it on the original PC board since that seems to have a nice ground plane and enough of the board remaining around the edges to mount the whole thing on stand-offs.  I could remove the dozen or so capacitors and resistors on the original board.
> I am thinking of using at least one of these in an existing piece of equipment, so something simple is desirable.
> Thanks for any suggestions.
> Fred Bray
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list