[time-nuts] Measuring Phase diference between different, GPSDO
dan at irtelemetrics.com
Mon May 20 08:33:17 EDT 2013
I have no affiliation with this product. I've used it to fix
intermittent connections that drove me crazy. It's not a contact
cleaner, and you'll have to read the details to understand what it does.
It's also avaliable from Napa auto parts as CE-1. It's not cheap...
Last time I used this, it was on an external hard drive case that the
sata connectors would need to be wiggled every time I powered it (even
tried re-flowing the solder joints!) Put this on it, haven't had to
touch the connectors in over a year.
If you guys are working on old equipment with sockets and connectors,
it's really worth looking at.
On 5/18/2013 4:46 PM, time-nuts-request at febo.com wrote:
> Resetting the boards may not do, but resetting the chips that are in
> sockets probably will, based on my two 5370s Didier KO4BB "Mark C.
> Stephens" <marks at non-stop.com.au> wrote:
>> >It is as you said Bob, I plugged the 5370b in and It flashed a zero
>> >then the display and front panel are blank.
>> >It has some other equipment in service on top of it so when I get a
>> >chance for some downtime, I'll pull it out and reseat the boards.
>> >Wish me luck!
More information about the time-nuts