[time-nuts] Time Nut Pickens at the MIT Flea ?

J. Forster jfor at quikus.com
Mon May 20 08:34:14 EDT 2013


There are cafe/pizza options in the Strattion Student Center, although
seating is somewhat limited. But there are other places in the same
building.

It's a short walk from the flea site (Mass Ave at Vasser Street) Bldg W-20

-John

================


> I was there as well, but did not see much of interest. That might be
> because Paul Swed scooped up the good stuff before I could finish the
> first pass :) Nice find Paul, hope they settle down for you. Would love to
> see a post-flea get together and put some faces with names, but I don't
> know of any places nearby.
>
> Paul - K9MR
>
> On May 19, 2013, at 10:22 PM, paul swed wrote:
>
> Good news at least the first EGG RB fired up and after adjusting the
> synthesizer is locked very nicely. Letting it bake and figuring out the
> dip
> switches. They were wrong or purposely offset. Hard to say. Lamp voltage
> is
> 12 VDC I suspect thats quite a good number if compared to the old FRS and
> FRCs I have down in the 5-6V range. The FRS/C run 12 new.
> Can't really find any documentation, but expected that.
> Regards
> Paul
> WB8TSL
>
>
> On Sun, May 19, 2013 at 10:09 PM, Bob Bownes <bownes at gmail.com> wrote:
>
>> We should plan a Time-Nuts BOF lunch after the next flea.
>>
>> Saw little TN gear @ Dayton save one Efretom RBI time base for $1800 and
>> a
>> few 10811s of dubious quality for $50 ea. the dents put me off gambling
>> on
>> one since I was given or the afternoon before! ;)
>>
>> On May 19, 2013, at 21:50, paul swed <paulswedb at gmail.com> wrote:
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>




More information about the time-nuts mailing list