[time-nuts] FE-5680A control programs
FabioEb at quipo.it
Fri May 24 10:45:29 EDT 2013
Hello, I'm still here,
unfortunately my Rb are gathering dust
and I cannot follow the list everyday.
I wrote some scripts to automate data
collection from FE5680 and my counter
using python. They run in Windows and
can be used and modified at will, I've
not much time now, so I cannot give support
on their usage, but it should be easy enough.
I will check what I have...
Il 2013-05-24 14:06 Ziggy9 ha scritto:
> A few months ago Fabio Eboli posted some Python functions that might
> be useful. I haven't used or tested them myself, but they might be of
> interest. Still up on pastebin at
> I don't know if Fabio has done any further work on this but perhaps
> he'll chime in here.
> On May 24, 2013, at 0:22, Chris Albertson <albertson.chris at gmail.com>
>> You have been collecting programs? I did not know there were any to
>> collect. Do you have a list? I don't have much use for a .exe file
>> is your are source codes available that would be great.
>> On Thu, May 23, 2013 at 4:44 PM, EB4APL <eb4apl at cembreros.jazztel.es>
>>> Since I bought my FE-5680A (10 MHz, 1 PPS variety), I have been
>>> control programs for it and keeping then in reserve. Now that I'm
>>> going to
>>> box it with a distribution amp I tried some of them, first of all to
>>> the frequency against the GPS. I used Bob Campbel's VK4XV
>>> "Fe5680Calibrator.exe" with good results. I have other programs
>>> interrogates the device and shows the hex dumps, but I would like to
>>> if there is a windows program that allows to send other that the
>>> related commands to the device and get the responses not in hex but
>>> translated to plain language. In fact I don't know if there are
>>> housekeeping commands for reading thinks like the lock status or the
>>> voltage like the analog outputs of the FRS-C and others.
>>> Thanks in advance,
>>> Ignacio EB4APL
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>>> and follow the instructions there.
>> Chris Albertson
>> Redondo Beach, California
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the time-nuts