[time-nuts] Question concerning ADEV measurements

John Miles john at miles.io
Wed Oct 9 17:42:48 EDT 2013


Not sure if there's anything to worry about, but I don't think there are any
good reasons to do it.  The OCXO in the 5370 is an order of magnitude more
stable from one second to the next than the counter's resolution would allow
you to measure at t0=1s.  

-- john, KE5FX
Miles Design LLC

> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-
> bounces at febo.com] On Behalf Of Robert Darby
> Sent: Wednesday, October 09, 2013 12:30 PM
> To: time-nuts at febo.com
> Subject: [time-nuts] Question concerning ADEV measurements
> 
> Is there a methodological difficulty using the reference clock to also
> clock a TIC?
> 
> Specifically, I have a 5370B with the DUT on the start input and a 5065A
> on both the stop input and the external clock input.
> 
> Thanks,
> Bob Darby
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-
> bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list