[time-nuts] New NTBW50AA

[Mark Sims]

It is reporting temperature just fine.   It probably has the "new"  revision temperature sensor chip that the firmware does not read the high res temperature properly.   Also,  one version of those Nortel units (don't remember which one) doesn't do high res temp readings even with the old rev temp chip.

The plots in Lady Heather default to auto-scaling and auto-centering with each update.   That can cause the plots to appear to jump around as new data come in.

And the F11 full screen mode toggle is known to not work with many monitor/window size combinations.

The Nortel units don't  save the oscillator damping/gain/time constant settings in EEPROM (at least with any of the documented commands).