[time-nuts] Varian 921-0062 ion pump supply question
Robert Atkinson
robert8rpi at yahoo.co.uk
Thu Sep 19 16:42:04 EDT 2013
Hi Corby,
How's it wired now? Basically it should be two windings in series, say line to 1, 2 linked to 3 and neutral to 4. To set to 120V leave line and neutral were they are and link 2 to 4 and 3 to 1. As a double check for phasing when you lift the link between 2 and 3 check for winding resistance between 1 and 2 and separately 3 and 4. They should benear identical resistance values. Change tag numbers to suit your original wiring.
HTH,
Robert G8RPI.
________________________________
From: "cdelect at juno.com" <cdelect at juno.com>
To: time-nuts at febo.com
Sent: Thursday, 19 September 2013, 20:43
Subject: [time-nuts] Varian 921-0062 ion pump supply question
Hi,
I'm working on a Varian 921-0062 ion pump controller for the pumps used
in a Maser.
I just got it in and it is wired for 240 VAC and I want 120VAC.
My manual and the ones I can find on line show a power TX with 4 input
terminals which they show how to strap for 240 or 120 VAC.
My unit has TX has 6 terminals 1/2/3/4/8/9.
Does anyone know how to wire this TX for 120 VAC?
Thanks,
Corby Dawson
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list