[time-nuts] HP5061B Beam Tubes

Bruce Griffiths bruce.griffiths at xtra.co.nz
Mon Sep 23 07:50:15 EDT 2013


It does if you append the bit in the following line ie append
ing_instructions.pdf. to form:

http://www.symmetricom.com/media/files/downloads/product-datasheets/shipping_instructions.pdf


Bruce

Bob Camp wrote:
> Hi
>
> That link does not lead to anything.
>
> Bob
>
> On Sep 23, 2013, at 2:57 AM, cdelect at juno.com wrote:
>
>    
>> Per the following Symmetricom instructions, HP/Agilent/Symmetricom tubes
>> or instruments with tubes are exempt from the Hazmat requirements if
>> shipped within the USA. You still have to label them per the instructions
>> and as stated you are considered "trained" If you understand the
>> instructions.
>>
>> http://www.symmetricom.com/media/files/downloads/product-datasheets/shipp
>> ing_instructions.pdf
>>
>>
>> One other source for tubes for your 5060A/5061A/5061B (and 5062C with a
>> bit more mods) is to use FTS tubes removed from FTS 4050 and 4060 units.
>> Some minor mechanical mods and you have to make adaptor cables but they
>> are simple to make.
>>
>> Corby
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>      
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>    



More information about the time-nuts mailing list