[time-nuts] Rb vs.Crystal OCXO
Bill Dailey
docdailey at gmail.com
Sun Apr 27 13:04:25 EDT 2014
I unplug the antenna from my fury boards. I hope this is an effective alternative.
Sent from mobile
On Apr 27, 2014, at 9:02 AM, "Tom Van Baak" <tvb at LeapSecond.com> wrote:
>> The Pendulum GPS-88 and GPS-89 have a button on the front you push when
>> you want to force it into hold-over to do your measurement, for this
>> very reason.
>>
>> PPS steering and OCXO steering is the same thing once you forced the PPS
>> into the right range. Some *really* depend on the synchronicity between
>> 10 MHz and PPS, and you should not obscure it if possible.
>>
>> Cheers,
>> Magnus
>
> When doing a sensitive measurement where stability is more important than accuracy I turn off GPS disciplining.
>
> The TBolt has commands to go into and out of holdover. But more effective are the 0x8E,0xA3,4 and 0x8E,0xA3,5 commands which simply disable and enable disciplining.
>
> /tvb
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list