[time-nuts] Fwd: Re: Upgrade an HP 5342A microwave frequency counter to have an oven oscillator.

Götz Romahn goetz at g-romahn.de
Mon Dec 1 05:38:26 EST 2014


hello Alex,
my MV89 is also labeled MV89A XO00281M. So I think it should work.
73 Götz


Am 30.11.2014 20:20, :
> Hi Goetz
>
> "I built DIY one with a PCB from Gerry using my Morion MV89 OCXO and it
> is working fine. Fully compatible with hp53131 calibration procedure.
> Götz "
>
> I have the Morion MV89A XO00281M-CT-MV89, would it work with that board
> also?
> 73
> KJ6UHN
> Alex
>
>
>
> -------- Original Message --------
> Subject: 	Re: [time-nuts] Upgrade an HP 5342A microwave frequency
> counter to have an oven oscillator.
> Date: 	Sun, 30 Nov 2014 17:08:33 +0100
> From: 	Götz Romahn <goetz at g-romahn.de>
> Reply-To: 	Discussion of precise time and frequency measurement
> <time-nuts at febo.com>
> To: 	Discussion of precise time and frequency measurement
> <time-nuts at febo.com>
>
>
>
> Adrian,
> if you do not insist on a hp10811A, have a look at Gerrys site
> http://gerrysweeney.com/update-diy-hpagilent-53131a-010-high-stability-timebase-option-pcbs-available/
> You can buy an assembled option 10 compatible OCXO modul for less than
> 100 GBP.
> I built DIY one with a PCB from Gerry using my Morion MV89 OCXO and it
> is working fine. Fully compatible with hp53131 calibration procedure.
> Götz
>
>
>
>
>


More information about the time-nuts mailing list