[time-nuts] Lucent KS-24361, curious observation
tic-toc at bodosom.net
Mon Dec 1 11:47:37 EST 2014
On Mon, Dec 1, 2014 at 11:15 AM, Graham <planophore at aei.ca> wrote:
> It has been less than 18 hours since I powered them up so I am not yet
> wondering why the the REF-0 LED's are in the state they are as I have seen
> reports of others having to wait 24 hours or so before every "locks in".
There are differing states. My pair went OK+Standby in about 10 minutes
but they're not "stable" at that point.
Here's a log snippet:
Log 019:20141128.00:00:00: Power on
Log 020:20141128.00:00:26: Power settings ok, Int: 17 dBm, Ext: 17 dBm
Log 021:20141128.00:52:21: Position hold mode started
Log 022:20141128.01:28:32: GPS reference valid at 20141128.20:34:00
Log 023:20141128.20:35:04: Locked mode entered
Log 024:20141129.10:35:03: Ready for 4 hour flywheel
Log 025:20141129.16:35:03: Ready for 8 hour flywheel
The first timestamp after power-on is 00:00 of the last valid date prior to
power-off. I assume the deltas are correct. So 1:29 to Locked and 20 more
hours to "stable". Holdover uncertainty continues to decrease for many
more hours. It decreased from hundreds of microseconds to 3 at the time of
that log and is now at 900 nanoseconds.
More information about the time-nuts