[time-nuts] KS-24361 quirk

paul swed paulswedb at gmail.com
Sun Dec 14 09:36:08 EST 2014


I haven't checked the pps either. But the reason to put the 15 Mhz into
standby is that they combine both signals in a resistive combiner and
distribute the signals to multiple radios.
If two were active it would create issues. This method avoids the gap
switch of a relay.
Regards
Paul
WB8TSL

On Sun, Dec 14, 2014 at 12:23 AM, Joseph Gray <jgray at zianet.com> wrote:
>
> I haven't checked the PPS yet, but the 15 MHz from the standby unit is
> off on my setup.
>
> Joe Gray
> W5JG
>
>
> On Sat, Dec 13, 2014 at 9:55 PM, Hal Murray <hmurray at megapathdsl.net>
> wrote:
> > Can somebody confirm that the PPS and 15 MHz on the standby unit are
> disabled?
> >
> > Does anybody understand how/why they do things that way?  Is that a
> typical
> > Telco interface?
> >
> >
> > If anybody is poking around inside and find a simple way to turn them
> back
> > on, please share.
> >
> >
> > The PPS is 400 microseconds wide.
> >
> >
> > --
> > These are my opinions.  I hate spam.
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


More information about the time-nuts mailing list