[time-nuts] housing multiple GPS timing receivers in the same box.
mike cook
michael.cook at sfr.fr
Wed Feb 5 06:59:36 EST 2014
Le 5 févr. 2014 à 01:52, SAIDJACK at aol.com a écrit :
> Michael,
>
> use a simple BNC T-splitter. Works perfectly for me as long as both GPS
> carry the same antenna voltage. No loss in signal quality evident from the
> C/No readings, and dirt-cheap. No need to over-complicate this.
>
> bye,
> Said
>
Thanks Said,
I'll take that route I think, though with SMA as it's a bit smaller.
I'll just note here that I found that Mini-Circuits manufacture both through hole and smd parts covering the L1 band, so if I really needed the space I could try those. They are also much cheaper.
Have a good one.
>
> In a message dated 2/4/2014 14:41:40 Pacific Standard Time,
> michael.cook at sfr.fr writes:
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list