[time-nuts] How I got my FE-5680A to lock in Sydney, Australia

Magnus Danielson magnus at rubidium.dyndns.org
Sun Feb 9 03:34:06 EST 2014


On 09/02/14 02:57, Jamieson (Jim) Rowe wrote:
> Hi Magnus,
>
> Thanks again for those further suggestions. I do have a GPSDO, and I had
> been able to use it with a counter to check that the FE-5680A was
> swinging either side of 10MHz. But I didn't make sure that it was
> swinging evenly each side of 10MHz . According to my notes it was
> swinging between  9.999770 and 10.000036MHz -- i.e., about 230Hz low and
> about 36Hz high. But it was spending more of the time below 10MHz than
> above -- does this suggest to you that I should tweak C217 until it
> swings by about the same amount either way?

Yes, that is exactly what I would do.

Cheers,
Magnus



More information about the time-nuts mailing list