[time-nuts] HP53131A Fan/Blower

[Mike George]

Tony:

I replaced a fan in a 53132 by looking up the specs
on the existing fan and matching to one that was available.
On the 53132 I used Digi-Key 603-1009-ND.

The fan was part of the power supply as you said.
The wires are soldered to the board.

Good Luck,
Mike George

On 2/27/2014 18:35, Tony Greene wrote:
> Has anyone found a suitable replacement or a source for the fan/blower in the HP53131A ?  I have talked to Agilent and the fan/blower is not a seperate item, its part of the power supply board.
>
> ____________________________________________________________
> TRY FREE IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if5
> Capture screenshots, upload images, edit and send them to your friends
> through IMs, post on Twitter®, Facebook®, MySpace™, LinkedIn® – FAST!
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.