[time-nuts] Unusual 10544A

Magnus Danielson magnus at rubidium.dyndns.org
Sun Mar 16 11:27:47 EDT 2014


On 13/03/14 22:11, Tom Van Baak (lab) wrote:
> Do you have a photo? I have a large collection of hp oscillators here and do not see a 10544 with SMB. Are you sure it's not 10811?
>
> Then again, there are 10544A s/n 1528Axxxxx mounted on a 15-pin PCB (05238-20027) which has a SMB connector.

That board is a quick and dirty carrier for 10544 or 10811 if you like 
to just test-run them.

Cheers,
Magnus

>
> /tvb (i5s)
>
>> On Mar 13, 2014, at 12:44 PM, Mark Kahrs <mark.kahrs at gmail.com> wrote:
>>
>> Jerry Johnson has the following question:
>>
>>     "Some of the documents that I have found show pins and feed throughs
>>     with SMB right angle connectors for RF and probably control voltage.
>>     This one doesn't have the SMB connecgtor, just pins. The case says
>>     10544A part number (which I've not yet searched on) 1528A06401 but
>>     finding a used on probably won't find the internal information that
>>     I would like to have."
>>
>> Anyone seen this before?
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



More information about the time-nuts mailing list