[time-nuts] Lucent KS-24361, diag ports

Bob Camp kb8tq at n1k.org
Mon Nov 3 20:51:21 EST 2014


If the GPS box is the one in control of the survey process (maybe) then the slave box is just watching what’s happening. I would trust the GPS box far more than the slave when it comes down to fine grain GPS goings on.


> On Nov 3, 2014, at 10:52 AM, Bob Stewart <bob at evoria.net> wrote:
> Hi,
> It's possible that my REF-1 had a software fault.  I power-cycled both units, and now I can talk to both.  However, I see that there is at least one difference.  During the survey period, REF-0 mode only says "SURVEY".  REF-1 gives the percentage complete as shown on page 1-10 in the Z3801 users guide.  So, now I don't know whether or not to trust REF-1.  
> They have just let me know they are shipping the replacement, so this is all going to work out somehow.
> Bob
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list