[time-nuts] Divide by five

Wayne Holder wayne.holder at gmail.com
Fri Nov 7 20:08:27 EST 2014

I do a lot of work with SMD parts and would be happy to solder up and
SOIC-16 version of the 74AC161, such as this one:


onto a dip break out board, such as this one:


Or, if you need something more complex, I do a lot of PCB design using OSH
Park <https://www.oshpark.com> and I'd be happy to whip up a simple PCB for
you.  It takes a few weeks to turn around a board, but it's a very
economical service ($5 a square inch for three copies.)


On Fri, Nov 7, 2014 at 1:12 PM, Joseph Gray <jgray at zianet.com> wrote:

> I need to divide a 125 Mhz clock by five. I have looked on Mouser and every
> chip I find is either obsolete or in SMT. Can anyone recommend a chip that
> is fast enough and comes in DIP?
> Joe Gray
> W5JG
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list