[time-nuts] ks... answers The emails are getting long

Bob Camp kb8tq at n1k.org
Tue Nov 18 18:10:55 EST 2014


Actually there are three different approaches to the “double 5 MHz” question. 

Roughly 99.99% of all doubler / tripler OCXO’s out there do the trick with a simple single transistor stage and a  tuned tank. Follow it up with a tuned single transistor output amp. Cheap, easy, not very fancy, gets people mad when mentioned. It works plenty good enough. The basic design approach dates back to tube based multipliers done in the 1920’s. Just about any transmitter design textbook from 1930 through 1960 has design charts and tube based examples.  


> On Nov 18, 2014, at 4:26 PM, paul swed <paulswedb at gmail.com> wrote:
> Don
> The two units work together by a buggy cable from what I have heard so far.
> The Ref0 is the master that drives stuff it connects to REF1 that
> disciplines REF0.
> If GPS goes away or the ref1 it all keeps ticking. This is been teh system
> design for about 20 years.
> Many of us have the ref1 only and the internal osc is 5 Mhz so thats why
> you have seen discussions on multipliers here. Tap the 5 Mhz double it
> filter it and buffer it. there seem to be 2 schools of thoughts on the
> process. Balanced mixer or Wenzel.
> I would have hacked the answer already. But I need to keep my ref1 running
> so that it ages in. ASI will refund your money if bad. But only in 30 days.
> I do like what I see from the KS-... Can never remember the number.
> Regards
> Paul
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list