[time-nuts] LTR-Lite GPS

Dave Martindale dave.martindale at gmail.com
Tue Nov 25 16:49:36 EST 2014

I assume the Venus chipset NMEA output sentence set is a subset of the 
uBlox NMEA output set, and the NMEA messages are sufficiently 
standardized that the uCenter software can read them and display the 
results in a meaningful way.  Any other program that reads and displays 
NMEA data (and can be set to 38400 bps, instead of NMEA default 4800 
bps) would likely work.

Of course, none of the commands in uCenter that configure the receiver 
are going to work, both because the receiver isn't a uBlox and because 
the serial port is unidirectional.  You only get status.

- Dave

On 25/11/2014 16:07, Joseph Gray wrote:
> Looking closely at the board, I see it uses a Venus GPS chipset. And yet
> folks here are using the ublox ucenter software with it. What am I missing?
> Joe Gray
> W5JG
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list