[time-nuts] Some specs for MTI Millren 260 OXCOs
GandalfG8 at aol.com
GandalfG8 at aol.com
Thu Oct 23 17:30:22 EDT 2014
More than one way to skin an egg, or something like that anyway:-)
A Google search on Vaish Milliren turned up this paper and another on the
260.....
_www.mti-milliren.com/MTIPapers/Rubidium_Perf_in_260.pdf_
(http://www.mti-milliren.com/MTIPapers/Rubidium_Perf_in_260.pdf)
_www.mti-milliren.com/MTIPapers/High_Vol_Production.pdf_
(http://www.mti-milliren.com/MTIPapers/High_Vol_Production.pdf)
The site wouldn't allow access just into the MTIPapers directory but the
full URLs seem to work ok
Regards
Nigel
GM8PZR
In a message dated 23/10/2014 22:12:17 GMT Daylight Time,
pete at petelancashire.com writes:
Anyone have a IEEE account ?
http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=560251&url=http%3A%2F%
2Fieeexplore.ieee.org%2Fstamp%2Fstamp.jsp%3Ftp%3D%26arnumber%3D560251
-pete
On Thu, Oct 23, 2014 at 1:07 AM, Hal Murray <hmurray at megapathdsl.net>
wrote:
>
> dgminala at mediacombb.net said:
> > The model 260 datasheet is on MTI's web site at
> http://www.mti-milliren.com
>
> That data sheet covers their standard models. You can see the part
number
> in
> the far right column of the table on the bottom of the last page of the
> double page spread. They are likely to have a few in stock.
>
> They also make lots of specials. Tell them the specifications you want
and
> they will make a new part number, put it into their system so you can
> easily
> order it, and keep the details private so your competitors have more work
> to
> do if they want to clone or reverse engineer your designs.
>
> If the part number on a unit you get from eBay isn't on the data sheet,
> it's
> probably a special. You can get a general idea from the data sheet but
you
> will probably have to measure it if you want the fine print.
>
>
> --
> These are my opinions. I hate spam.
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list