[time-nuts] What sort of oscillator is this?

[Bob Camp]

Hi

The information came from the HP data sheet on the oscillator. They provide it to the people who manufacture the oscillators for them.

Bob

On Sep 29, 2014, at 1:14 PM, Dr. David Kirkby (Kirkby Microwave Ltd) <drkirkby at kirkbymicrowave.co.uk> wrote:

> On 29 Sep 2014 17:58, "Bob Raker" <bob.raker at gmail.com> wrote:
>> 
>> It is a low end OCXO - uses AT cut crystal.  15V @ 300 mA.  Warm-up time
> is
>> 6 minutes max for .1 ppm.  Other specs as indicated in previous emails.
>> 
>> Has NO EFC.
> 
> Where do you get this information from?
> 
> I think I am going to take the covers off this soon, as I am keen to get
> direct access to the samplers.  Unfortunately Keysight have now sold all
> the cables, but do have the front panel overlay which is arguably the most
> critical item. When I do, I will photograph the oscillator.
> 
> Dave
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.