[time-nuts] What sort of oscillator is this?
Dr. David Kirkby (Kirkby Microwave Ltd)
drkirkby at kirkbymicrowave.co.uk
Mon Sep 29 19:16:01 EDT 2014
On 29 Sep 2014 20:06, "Hal Murray" <hmurray at megapathdsl.net> wrote:
>drkirkby at kirkbymicrowave.co.uksaid:
> > Unfortunately Keysight have now sold all the cables, but do have the
> > panel overlay which is arguably the most critical item.
> > Spending £500 on 5 cables and a front panel overly is more attractive
> > spending £8000 on an upgrading the model.
> For £500, I'll bet you can get a good hand crimp tool, some good coax,
> handful of connectors.
Yes, but I have no way to test them. I don't have a 2.4 mm connector gage,
and I am not keen to put 2.4 mm plugs into something very expensive without
checking the pin depth first.
I don't have a 2.4 mm cal kit, so I can't check the return loss.
I would really like to find a male 2.4 mm connector gage and satisfy myself
the cables, even if I get them professionally made.
I believe someone might have some 2.4 mm HP cables. I can put the SMA on
and at least check the pin depth.
More information about the time-nuts