[time-nuts] Frequency doubler 5/10 and distribution amplifier for Lucent KS-24361
aroby at antamy.com
Sat Apr 4 22:12:04 EDT 2015
Gerhard - I would like to make the board if you could make the layout available. I don't have Altium, so would need the artwork to be able to toner transfer the board. Is it available?
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Gerhard Hoffmann
Sent: Saturday, April 04, 2015 7:19 AM
To: time-nuts at febo.com
Subject: Re: [time-nuts] Frequency doubler 5/10 and distribution amplifier for Lucent KS-24361
Am 03.04.2015 um 04:04 schrieb Philip Gladstone:
> I'm coming late to this thread from January -- but did anybody ever
> make the PCBs for Gerhard's 10MHz output board? I'm interested.....
> I just got my pair of RFTG's.
There isn't a lot of news.. The interest on the net quickly boiled down, my sample works and so there was not a great incentive to follow that with much energy. And getting boards out does not mean that those are really built or that there is any feedback at all, as I saw with my 220pV/sqrtHz preamp.
The Altium Designer files are available, maybe the regulators should be changed to sth. bigger (TO220 with small heat sink or so)
(who will spend this rainy&cold Easter weekend on a 1pps generator whose outputs can be skewed in ps-steps to check the linearity of T2D converters or time stretchers.) _______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts