[time-nuts] Frequency doubler 5/10 and distribution amplifier for Lucent KS-24361
kb8tq at n1k.org
Sat Jan 3 08:47:31 EST 2015
So is any of the rest of the family still speaking to you? :) That’s a lot of work. Very nicely done and documented !!
Phase noise or ADEV would be well worth checking out. I see no reason why they would be a problem, but one never knows until the test is run.
I would suggest *some* resistance to ground on the outputs of the distribution amp. Without any R, you can get into ESD issues when you connect a cable. Is it a big deal - not really.
> On Jan 2, 2015, at 8:43 PM, Gerhard Hoffmann <dk4xp at arcor.de> wrote:
> Hi, all,
> over the Christmas season, I have designed and built a frequency doubler from 5 to 10 MHz and a distribution amplifier for the Lucent KS-24361. A preliminary writeup is under
> < http://www.hoffmann-hochfrequenz.de/downloads/DoubDist.pdf >
> It features 4 or 5 10 MHz 10 dBm outputs and an optional 1PPS on SMA with CMOS levels into 50 Ohm.
> It is a small board to be mounted inside the KS-24361.
> Comments invited.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts