[time-nuts] how to find low noise transistors

KA2WEU at aol.com KA2WEU at aol.com
Sun Jul 19 10:41:31 EDT 2015


For HF to uW oscillators  if find these modeling efforts not adequate  . 
Only a test circuit will show the prove... 
 
Ulrich N1UL 
 
 
In a message dated 7/19/2015 10:36:10 A.M. Eastern Daylight Time,  
azelio.boriani at gmail.com writes:

For a  method to extract AF and KF try  this:
<http://joerg-berkner.de/Fachartikel/pdf/2000_AKB_Berkner_1f_noise.pdf>

see  also
<http://scholarcommons.usf.edu/cgi/viewcontent.cgi?article=2270&context=etd>
from  page 55, on the parameter extraction for the BJTs

usually AF is greater  than 1, as you can see in this appnote from  CEL:
<http://www.cel.com/pdf/appnotes/an1026.pdf>

A SILVACO  appnote on how to model for SPICE2 for 1/f (from page  45):
<http://www.silvaco.com/content/kbase/noise_modeling.pdf>

On  Sun, Jul 19, 2015 at 4:59 AM, John Miles <john at miles.io>  wrote:
>
>> -----Original Message-----
>> From:  time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of  
KA2WEU--
>> - via time-nuts
>> Sent: Saturday, July 18, 2015  3:40 PM
>> To: time-nuts at febo.com
>> Cc:  akpoddar at synergymwave.com; Alexander.Roth at rohde-schwarz.com
>>  Subject: Re: [time-nuts] how to find low noise  transistors
>>
>>  BFG540
>>
>>
>
> That's what I mean -- both  BFG540 and BFG591 have been discontinued by 
NXP.  Guess they don't sell  enough of them these days.
>
> -- john, KE5FX
> Miles Design  LLC
>
>
>  _______________________________________________
> time-nuts mailing list  -- time-nuts at febo.com
> To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the  instructions  there.
_______________________________________________
time-nuts mailing  list -- time-nuts at febo.com
To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.



More information about the time-nuts mailing list