[time-nuts] 50 ohm Driver
martyn at ptsyst.com
Wed Mar 4 05:26:33 EST 2015
A quick question.
My output driver for a simple amplifier.
I use three gates (in parallel with resistors) from a 74AC14 to give me about 0-3.2V into 50 ohm.
I want to have a driver that gives me a full 0-5V (at least 0-4.5V) swing into 50 ohms.
Can anyone recommend an IC that can delivery this.
But it needs to have similar jitter performance to the 74AC14.
I use it up to 10 MHz.
More information about the time-nuts