[time-nuts] Lady Heather

James Tucker james.d.tucker at gmail.com
Wed Mar 11 20:04:32 EDT 2015

Mark, and anyone else interested;

I have an 'E' Thunderbolt, and use LH3.10 to monitor it contiguously, and
with no issues not related to the device itself (iffy eeprom/flash, crystal
jumps), but it even shows all 12 slots for available birds, so it works
fine for me on W7Pro. No special command line options for serial port.
EdgePort USB converter.


Sent from *my* galaxy (Nexus).
On Mar 9, 2015 10:37 PM, "Mark Sims" <holrum at hotmail.com> wrote:

> Lady Heather is set up to run the serial port at 9600,8,N,1   If it sees
> data errors,  after around 20-35 seconds or so,  it toggles to 9600,8,O,1
>  This feature was added to support the Trimble Resolution timing
> receivers.   You can try the /rt command line option and see if that makes
> any difference.  That will force the ODD  parity flag.  Or you might try
> configuring the receiver for 9600,8,N,1 via the Trimble software. BTW, Lady
> Heather has never been officially tested with the Thunderbolt-E ... nobody
> seems to use/have them.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list