[time-nuts] Trimble Thunderbolt and David Partridge divider boardquestion

[Chris Wilson]

Hello,

on 13/10/2015 14:41  you wrote:





>  I believe the author was looking into modifying his circuit to use
> a LTC6957 as a frontend. Not sure if he ever got around to it.
> https://www.febo.com/pipermail/time-nuts/2015-May/092138.html

> -=Bryan=-

Hi Bryan, now sorted, I have done some `scoping and the LF signal *IS*
getting into the divider. I added a splitter I bought from a US member
some  time  ago (thanks for the SMA TO BNC adapter cable!, and now the
sine  wave  is  clean  from the Trimble splitter. The signals from the
divider are still dirty when TX'ing though, but that's not an issue as
I rarely use them. Thanks for the info.


-- 
       Best Regards,
                   Chris Wilson.