[time-nuts] Rpair of an 8662 HP Generator

[Rob Sherwood.]

If you 8662A has gone "bang" yet, replace the electrolytic on the three boards is a good starting place.  Once it goes bang you will have a to start replacing solid-state devices.  

Rob, NC0B

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of KA2WEU--- via time-nuts
Sent: Friday, April 15, 2016 1:04 PM
To: time-nuts at febo.com
Subject: [time-nuts] Rpair of an 8662 HP Generator



My  signal generator has a poor, intermittent power  supply.  The RF section is ok. Who can please tell me which company can and  will fix these older but excellent  generators?
 
Thanks, Ulrich 
 
 
_______________________________________________
time-nuts mailing  list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.



--
If this email is spam, report it to
https://support.onlymyemail.com/view/report_spam/ODExMjI6MTg3Mjk0MDA3NTpyb2JAbmMwYi5jb206ZGVsaXZlcmVk