[time-nuts] State of the art of crystal oscillator measurements
john at miles.io
Thu Aug 11 16:22:07 EDT 2016
Remember that L(f) is expressed in dBc/Hz, not dBm/Hz. If it were dBm/Hz, then kT would be the limit. But in dBc/Hz terms, the limit is 177 + the DUT's output power in dBm.
Assuming a 50 ohm system, of course.
-- john, KE5FX
Miles Design LLC
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Mike
> Sent: Thursday, August 11, 2016 12:51 PM
> To: 'Discussion of precise time and frequency measurement';
> KA2WEU at aol.com; tvb at leapsecond.com
> Cc: enrico.rubiola at gmail.com
> Subject: Re: [time-nuts] State of the art of crystal oscillator measurements
> kT is indeed relevant for a physical implementation. - Mike
> Mike B. Feher, EOZ Inc.
> 89 Arnold Blvd.
> Howell, NJ, 07731
> 732-886-5960 office
> 908-902-3831 cell
More information about the time-nuts