[time-nuts] Working with SMT parts.

Didier Juges shalimr9 at gmail.com
Fri Aug 12 21:29:41 EDT 2016


I just installed CopperConnection and it opens the ExpressPCB layouts just fine :)

Thanks for the tip, I will give it a go.

Didier KO4BB

On August 12, 2016 9:22:42 AM CDT, wb6bnq <wb6bnq at cox.net> wrote:
>Hi Didier,
>
>I use ExpressPCB as well, but I send the ExpressPCB file to a company 
>called Futurlec
>( http://www.futurlec.com/PCBService.shtml ).  They have reasonable 
>prices.  Because it is overseas it takes about three weeks to get the 
>product back.  So far I have been very impressed with the product I 
>recieved.  I have even had notches done in the four corners to fit a 
>plastic box that came out very well.
>
>Also, There is a person who started to write his own version  of layout
>
>program based off of the ExpressPCB program called  "Copper 
>Connection."  (  http://www.robotroom.com/CopperConnection/index.html )
> 
>It is a bit more involved than the ExpressPCB program and does have 
>GERBER files as a selection.  However he charges for the program but it
>
>seems the prices are reasonable ( 
>http://www.robotroom.com/CopperConnection/Buy.html ).
>
>73....Bill....WB6BNQ
>
>
>Didier Juges wrote:
>
>>The way ExpressPCB works is that their free software produces boards
>in a proprietary format, and you have to pay to convert their design
>file to Gerber.
>>
>>Your mileage may vary but I found the combination of design tools
>learning curve, board quality and quick service to be worthwhile to me.
>>
>>I have tried Eagle twice and never could manage to build the models I
>needed. It may have been an issue of not finding the right tutorial but
>I have produced several ExpressPCB designs in less time than I have
>tried (unsuccessfully) to produce a single schematic in Eagle, let
>alone a PWB. Since it is a hobby that has become a business, time
>matters to me, design time and delivery.
>>
>>At that point, the cost of the Gerber becomes somewhat irrelevant.
>>
>>Note that you can make boards of any size in ExpressPCB.
>>
>>I am not advocating it is the best solution for everyone, I personally
>would like to be proficient with Eagle, but Express PCB works for me.
>>
>>Didier KO4BB
>>
>>
>>
>>
>>On August 11, 2016 10:45:45 PM CDT, Chris Albertson
><albertson.chris at gmail.com> wrote:
>>  
>>
>>>This seems totally backwards.  Typically a Gerber file is something
>>>you make yourself on your computer then send it in for a prototype.
>>>Seems odd to buy them.
>>>
>>>I checked ExpressPCB prices and they are very high.  I can get PCBs
>>>made quickly in the US for $3 per square inch, shipping included with
>>>$9 minimum order.  And  you don't buy the Gerbers.
>>>
>>>I notice ExpressPCB offers free software.  But it is totally
>>>non-standard and you can't use it for anything other then for their
>>>service.  Most people needing free PCB software use Eagle, some use
>>>Kicad or some others.  But Eagle seems to be kind of a universal
>>>standard.
>>>
>>>
>>>
>>>
>>>On Thu, Aug 11, 2016 at 8:55 AM, Didier Juges <shalimr9 at gmail.com>
>>>wrote:
>>>    
>>>
>>>>I concur. I have been using ExpressPCB extensively over the last 2
>>>>      
>>>>
>>>years
>>>    
>>>
>>>>with great satisfaction now that it is possible to get Gerber files
>>>>      
>>>>
>>>from
>>>    
>>>
>>>>them.
>>>>I typically use the mini board pro service (3 bare boards, 2 sided
>>>>      
>>>>
>>>with
>>>    
>>>
>>>>solder mask and silk screen) for prototypes and then buy the Gerbers
>>>>      
>>>>
>>>-- 
>>>
>>>Chris Albertson
>>>Redondo Beach, California
>>>_______________________________________________
>>>time-nuts mailing list -- time-nuts at febo.com
>>>To unsubscribe, go to
>>>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>and follow the instructions there.
>>>    
>>>
>>
>>  
>>
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to
>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.

-- 
Sent from my Moto-X wireless tracker while I do other things.


More information about the time-nuts mailing list