[time-nuts] Knights OCXO: Now in plain text...
Matthias.Jelen at gmx.de
Thu Dec 8 09:17:14 EST 2016
very good, thanks! That helps a lot...
Gesendet: Donnerstag, 08. Dezember 2016 um 14:01 Uhr
Von: "Mike Cook" <michael.cook at sfr.fr>
An: "Discussion of precise time and frequency measurement" <time-nuts at febo.com>
Betreff: Re: [time-nuts] Knights OCXO: Now in plain text...
> Le 8 déc. 2016 à 10:40, Matthias Jelen <Matthias.Jelen at gmx.de> a écrit :
> 3rd try, I was using a webmailer which changed it defaults to html. Thanks for the hint Mike!
> I got an OCXO from a piece of scrapped Agilent equipment.
> The OCXO has a label on it saying:
> CTS KNIGHTS
> 10.000 MHz
I found a ref that the 08924-61037 is a HP part number and googling the two found
Pin 1 B+ 12.65V IN
Pin 2 GND
Pin 3 Oven +10-12V +-
Pin 5 OSC Disable
SMB RF out
There is NO pin 4 . work that out.
Perf 10MHz 2x10-9/day
The URL is < http://www.mykit.com/kor/products/std/std_k2.html >
> The OCXO has four wires and an RF-Connector, so RF OUT and GND are easy to spot.
> If find a lot of those on ebay, but no info on the pinout, supply voltage (or performance...).
> If anyone knows something about this part, I´d be gratefull.
> Best regards,
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts[https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts]
> and follow the instructions there.
"The power of accurate observation is commonly called cynicism by those who have not got it. »
George Bernard Shaw
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts[https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts]
and follow the instructions there.
More information about the time-nuts