[time-nuts] Trimble Thunderbolt error
Bob Camp
kb8tq at n1k.org
Mon Feb 15 17:53:29 EST 2016
Hi
…. also….
If it is a rollover bug, does it come back when the unit is power cycled or is there some magic in a
eprom that locks it to the correct era? (all of mine seem to be past FW 3.00)
Bob
> On Feb 15, 2016, at 11:57 AM, Nigel Vander Houwen <timenuts-nigelvh at nigelvh.com> wrote:
>
> Luc,
>
> Do you have a reference for this?
>
> Nigel
>
>> On Feb 15, 2016, at 01:22, Luc Gaudin <lgaudin at naelcom.com> wrote:
>>
>> Hello,
>>
>> The issue was known on the Thunderbold for the older firmware version up to firmware v3.00.
>> The product will not report the correct extended GPS week number after the Feb,13th 2016.
>> After the rollover to week #860, the thunderbolt will not make position for 2 hours, because the Ephemeris data on the GPS receiver being consider incorrect.
>> The module will work fine after this 2 hours.
>>
>> Regards,
>>
>> Luc
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list