[time-nuts] moon bounce for synchronization

Jeremy Nichols jn6wfo at gmail.com
Sat Jan 30 13:43:16 EST 2016


Ooh! Ooh! Not only a 5245 with a 5265 voltmeter plug-in but a 5360 
Computing Pig! Great picture, thanks for posting it.

Jeremy
N6WFO


On 1/30/2016 6:16 AM, jimlux wrote:
> This month's historical picture from JPL
> http://beacon.jpl.nasa.gov/historical-photo-of-the-month
>
> This atomic clock was used at the Goldstone Time Standards Laboratory 
> in 1970, to synchronize clocks at Deep Space Network stations around 
> the world. This master clock was accurate to plus or minus two 
> millionths of a second, when compared to clocks maintained by the 
> National Bureau of Standards and the U.S. Naval Observatory. In the 
> late 1960s, JPL had developed a moon bounce technique to transmit 
> signals from one deep space antenna to another. Experiments included 
> periodic measurement of timing signals that were reflected from the 
> surface of the moon, to find out if the station clocks were within 
> allowable limits for accuracy.
>
> Time-nut will recognize, of course, that none of the things in that 
> picture are actually an atomic clock, although they are thing that are 
> useful if you have an atomic clock.
>
>
> Note the sophisticated temperature monitoring system.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list