[time-nuts] over-determined clock solution

Azelio Boriani azelio.boriani at gmail.com
Sat Jun 25 16:38:15 EDT 2016


In this receiver mode all the satellites are used to compute the
timing solution. See page 80 of the 2012 Thunderbolt-E manual:

<http://leapsecond.com/pages/tbolt/Thunderbolt-2012-02.pdf>

This mode is available when the position of the antenna is known and
is stationary. Timing receivers usually take care of the initial
position survey at power-on and enter this mode automatically after
the survey is over.

On Sat, Jun 25, 2016 at 4:07 PM, Steve <steve65 at suddenlink.net> wrote:
> The phrase "over-determined clock solution" is used in the Trimble
> Thunderbolt user manual in describing operation of the Thunderbolt GPS
> receiver. The manual does not discuss the phrase in any detail, appearing to
> assume the reader understands its meaning. An internet search on
> "over-determined clock solution" did not turn up any substantive hits.
>
> What does "over-determined clock solution" mean?
>
> Thanks.
>
> Steve, K8JQ
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list