[time-nuts] 10khz gps board

EWKehren at aol.com EWKehren at aol.com
Mon May 16 09:26:55 EDT 2016


You do not have to purchase an expensive 6T to get 10 KHz out even a $ 10  
unit has adjustable output some rely on the battery to memories the setting 
more  expensive ones have EEPROM
Bert Kehren
 
 
In a message dated 5/16/2016 7:03:23 A.M. Eastern Daylight Time,  
stephen at tompsett.net writes:

I  believe there are several Ublox modules that may do what you want  e.g.
LEA-6T LEA-M8T

But I find the "Precision Frequency Reference  (GPS Clock)" a useful tool
for generating GPS locked signals it's  programmable over a far wider
range than you require (450Hz-800MHz), but is  very simple to program  and
use.

http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=107&pro
ducts_id=234


On  16/05/2016 07:17, Ilia Platone wrote:
> Can anybody here advice me a gps  module breakout board with 10KHz
> output? I read on some web page that  there are some jupiter receivers
> that can do this but I can't find any  board or receiver with these
> modules.

>
> I need an  output in lower decades than 10MHz, for a test project.
> ("cheap" if  possible)
> Thanks in advance
> Ilia.
>  _______________________________________________
> time-nuts mailing list  -- time-nuts at febo.com
> To unsubscribe, go to
>  https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the  instructions there.
>

-- 
Stephen  Tompsett

_______________________________________________
time-nuts  mailing list -- time-nuts at febo.com
To unsubscribe, go to  
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the  instructions there.



More information about the time-nuts mailing list