[time-nuts] FS HP 5335A
Tom Holmes
tholmes at woh.rr.com
Tue May 17 22:06:37 EDT 2016
HI Bob...
Thanks for the tip. Have been down that road with this one and it didn't fix it. I think someone may have deliberately disabled the internal timebase to prevent users from having anything but the house standard in play.
Tom Holmes, N8ZM
-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Bob Stewart
Sent: Tuesday, May 17, 2016 7:08 PM
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Subject: Re: [time-nuts] FS HP 5335A
Hi,
I know this is a for sale post, but there's a jumper that needs to be there to work with the regulator oscillator. Page 2-4 of the Operating and Service Manual (05335-90021) details the instructions for installing the Option 010, the 10811 OCXO. Instruction "c" is below. You'd need to add the jumper back in. The factory jumper looks like a resistor. It may simply be cut with side cutters on your unit. You can use just a piece of wire, of course.
"c. Remove electrical lead (jumper), PIN 8159-0005, that connects A4U1B(6) and U2B(6)."
Bob
--------------------------------------------
On Tue, 5/17/16, Tom Holmes <tholmes at woh.rr.com> wrote:
Subject: [time-nuts] FS HP 5335A
To: "'Discussion of precise time and frequency measurement'" <time-nuts at febo.com>
Date: Tuesday, May 17, 2016, 4:38 PM
For some reason it did not have an
internal timebase when I got it, and
throws an error, UNLESS you have an external 10 MHz
connected before you
turn it on. Then it works fine.
Please contact off list for details,
AND if you happen to be in Dayton, OH, this weekend for a
little ham radio
swap fest with a mere 25,000 people attending, no shipping
required.
AND there will be at least a few known time-nuts in town if
anyone wants to
meet up. Make yourself known to John at the TAPR booth.
Tom Holmes, N8ZM
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list