[time-nuts] Inside of FT1200-100

[Charles Steinmetz]

Christopher wrote:

> Despite running out the three sloted screws on the "top" around the
> circumference,  I'm not into the inside yet.   I don't have the  right
> thin-walled socket to remove the nuts at the opposite end.

It looks like a standard 5/32" nut driver will work fine.

<http://www.homedepot.com/p/203310440>

Best regards,

Charles



-------------- next part --------------
A non-text attachment was scrubbed...
Name: nut_driver.png
Type: image/png
Size: 49979 bytes
Desc: not available
URL: <http://www.febo.com/pipermail/time-nuts/attachments/20161120/b82df706/attachment-0001.png>