[time-nuts] Logging SPAD pulses on synced devices (was: Linux PPS clues?)
Ilia Platone
info at iliaplatone.com
Tue Nov 22 12:30:37 EST 2016
Hi,
Do a SPI bus do this job correctly? I'd have the clock on one line and
the pulses logged on a second line. Like CLK for clock pulses and
MOSI/MISO for serial logging of pulses. I'd avoid I2C because of
addressing packets.
Best Regards,
Ilia
On 11/05/16 04:48, Casey L. Jones wrote:
> Yes, you might need a separate dedicated chip to take in the serial
> input steadily. Although you may not. Many serial ports have a small
> buffer to prevent missed serial input when the operating system gets
> distracted with something other than processing serial data.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
--
Ilia Platone
via Ferrara 54
47841
Cattolica (RN), Italy
Cell +39 349 1075999
More information about the time-nuts
mailing list