[time-nuts] New Timestamping / Time Interval Counter: the TICC
bruce.griffiths at xtra.co.nz
Thu Nov 24 03:23:59 EST 2016
1-2ps rms single shot noise timestamping is feasible with embedded (occurs as part of the interpolation process) interpolator calibration. Only calibration of the differential delay between channels is required, as is required by all such instruments.
However the cost for such a timestamping counter is somewhat higher than for John's timestamping counter, but about a couple of orders of magnitude less than the final list price of a 5370B.
On Thursday, 24 November 2016 9:01 PM, Anders Wallin <anders.e.e.wallin at gmail.com> wrote:
On the website in the introduction you mention 22ps single-shot
time-stamping on the 5370A/B.
I think it's well established that the 53230A does about 11-12 ps for
time-intervals, which corresponds to about 9 ps single-channel. see for
On Wed, Nov 23, 2016 at 11:13 PM, Peter Vince <petervince1952 at gmail.com>
> Fantastic John - well done! Yes, I'll definitely put an order in as soon
> as possible.
> Peter (G8ZZR, London)
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> and follow the instructions there.
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts