[time-nuts] Sick Trimble Thunderbolt

David G. McGaw david.g.mcgaw at dartmouth.edu
Tue Nov 29 10:49:58 EST 2016


Connector part numbers and wiring are here: 
http://www.leapsecond.com/pages/tbolt/power.htm

David


On 11/29/16 10:39 AM, Bob Camp wrote:
> Hi
>
> The connector is a standard PC item. Pre wired supplies are an eBay item. Multi output
> industrial supplies are something I get from TRC. There are lots of vendors. For bench
> testing, hooking the harness to your normal bench supplies is probably a better bet than
> hooking into a brick.
>
> Bob
>
>> On Nov 29, 2016, at 10:22 AM, W1KSZ <w1ksz at earthlink.net> wrote:
>>
>> The output level on one of my T-Bolts has dropped way off so it's off to the bench with it.
>>
>> I thought  I had a spare power supply and power connector but it's no where to be found.
>>
>> Any suggestions where I can find a spare supply and power connector ? The one I use is
>> powering another so I can't borrow it.
>>
>> Tnx es HH, Dick, W1KSZ
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list