[time-nuts] Temp/Humidity control systems?

John Ackermann N8UR jra at febo.com
Wed Oct 26 12:16:04 EDT 2016

Hi Bill --

That's a bit more than I had in mind, but very cool. :-)  What I really 
meant was a heat pump or other unit with good control loop that I could 
use in a standard insulated space, just to keep "nominal" conditions 
(ie, not wide-range testing).


On 10/26/2016 12:09 PM, William H. Fite wrote:
> John, this is what I bought for the Orlando VA Medical Center when I was
> setting up the research lab there.
> Not cheap, though.  🤑
> https://www.thermalproductsolutions.com/products/walk-in-temperature-humidity-test-rooms
> On Wed, Oct 26, 2016 at 11:59 AM, John Ackermann N8UR <jra at febo.com> wrote:
>> I may have the opportunity to build a small "clock room" and am
>> considering whether I could make it an environmentally controlled space.
>> I'd like to learn about the options for doing this.
>> The space would probably be 6x8 feet or so, in a basement with one outside
>> wall.
>> Can anyone point me to purveyors of the hardware to do something like
>> this?  Because I'll have a limited time to build this, I'm looking for
>> something that uses more-or-less off the shelf gear, and not a whole lot of
>> custom engineering.
>> Thanks!
>> John
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/m
>> ailman/listinfo/time-nuts
>> and follow the instructions there.

More information about the time-nuts mailing list