[time-nuts] Lucent RFTFm-II-XO
kb8tq at n1k.org
Tue Sep 6 17:42:35 EDT 2016
One might *think* a redundant system would work fine with the plug yanked.
In this case …. nope. It needs to have a dummy connector on it to get the device
running. I agree that this is an “interesting” way to do it. Regardless of that, they
did the units need the signals from the other box (or fake signals) before they
will do useful stuff.
> On Sep 5, 2016, at 10:22 PM, Bill Hawkins <bill.iaxs at pobox.com> wrote:
> Fake connections? Isn't a redundant system supposed to allow one box to
> be disconnected?
> Bill Hawkins
> -----Original Message-----
> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Bob
> Sent: Monday, September 05, 2016 8:20 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Lucent RFTFm-II-XO
> If you only have one box, you need to be sure the "fake" connections on
> the interconnect are correct. If they are not, you will not get it to
> operate correctly.
> There also is a survey process if you have not had it running in your
> location before. That could take a few hours to a few days depending on
> your antenna.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts