[time-nuts] Lucent RFTFm-II-XO

Bill Riches bill.riches at verizon.net
Thu Sep 22 08:31:46 EDT 2016


Be careful of the pps output from the dual lucent boxes.  Tried to use it to sync SL and found that it is a weird non-standard pulse and would not work even with a pulse stretcher as it looked too narrow.  I use the pps output from a Jackson unit and it syncs SL fine.

73,

Bill, WA2DVU
Cape May

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Hal Murray
Sent: Thursday, September 22, 2016 2:07 AM
To: Discussion of precise time and frequency measurement
Cc: hmurray at megapathdsl.net
Subject: Re: [time-nuts] Lucent RFTFm-II-XO

> Is there a pinout posted somewhere  for the Lucent box RS422 D sub 9 connector?

It's in the mail archives.  Google for something like >time-nuts RS422 pinout<

If you are interested in timing, you want the PPS signal too.  (It won't be great over USB, but it might be fun to play with.  You can get your own hanging bridges.)



--
These are my opinions.  I hate spam.



_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.



More information about the time-nuts mailing list