[time-nuts] Special connector for Symmetricom X72 rubidium standard

Attila Kinali attila at kinali.ch
Wed Aug 16 08:37:54 EDT 2017


On Wed, 16 Aug 2017 14:01:02 +0200
Christoph Kopetzky <ck at cksd.de> wrote:

> I found one manufacturer which has nearly similar connectors in his 
> program: htk-jp.com
> They have SDR and HDR connectors on stock but all of them do have 0.8 mm 
> pitch. The
> original Molex 52660-2651 connector has 1.0 mm pitch so that would not 
> fit...

If you cannot find anything that fits, you can always unsolder the connector
and replace it with something that is still being sold. There should be quite
a few connectors out there, that have a solder pitch of 0.5mm. Though
it would definitely take some time to find a good fit.

			Attila Kinali

It is upon moral qualities that a society is ultimately founded. All 
the prosperity and technological sophistication in the world is of no 
use without that foundation.
                 -- Miss Matheson, The Diamond Age, Neil Stephenson

More information about the time-nuts mailing list