[time-nuts] HP5065A Rubidium questions: some progress

cdelect at juno.com cdelect at juno.com
Mon Feb 20 21:39:03 EST 2017


The resistor should be 12 Ohms nominal, I'd try installing a 12 Ohm and
see what happens.

The lamp should light within 10 seconds or so of applying power.

If you  have a spectrum analyzer you can place a loose wire close to the
lamp assy and see the approx 120Mhz signal if it's oscillating!

The lamp will be a whitish color when cold and a more reddish violet if



More information about the time-nuts mailing list